होम उत्पादमशीनिंग धातु भागों

M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings

प्रमाणन
चीन VEDALI HARDWARE CO., LTD प्रमाणपत्र
चीन VEDALI HARDWARE CO., LTD प्रमाणपत्र
ग्राहक समीक्षा
We had been friendly and long-term cooperation with VEDALI , We are looking forward to greater win-win cooperation with VEDALI .

—— Rajeev Sharma

A very pleasant purchasing experience , your products and service are good , Continue to maintain cooperation!

—— Antonio

मैं अब ऑनलाइन चैट कर रहा हूँ

M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings

M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings
M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings

बड़ी छवि :  M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings

उत्पाद विवरण:
Place of Origin: China
ब्रांड नाम: VDL
प्रमाणन: ISO
Model Number: MP1003
भुगतान & नौवहन नियमों:
Minimum Order Quantity: Negotiation
मूल्य: Negotiation
Packaging Details: 1 piece to a bag , 200 bags to a carton with dimension 15 X 10 X 10 cm , 5000 cartons to a 20 ft container
Delivery Time: 30 days
Payment Terms: L/C, T/T, Western Union , Paypal
Supply Ability: 100 , 000 sets per month
विस्तृत उत्पाद विवरण
सामग्री: अल्युमीनियम संपत्ति वर्ग: 5052
खत्म हो: ऑक्सीकरण रंग: काला
बेअदबी: रा2.0 लंबाई: 50
अधिकतम व्यास: 12 सहनशीलता: आईएसओ 2768
हाई लाइट:

धातु मशीनीकृत भागों

,

धातु मशीनिंग भागों

,

एल्यूमीनियम गैस्ट्रोस्कोप इकाई संयुक्त किट

 

M10 Black Oxide CNC Turned Parts Aluminum for Medical Equipments Fittings

 

 

Aluminum gastroscope unit joint kits are comprised of bushing ,header and joint pipe , these parts are assembly together as a full gastroscope connector , at the end of gastroscope has a threaded section for fixing into other pieces for holding unit joint kits .

 

 

Material for gastroscope unit joint kits turned part

 

Gastroscope unit joint kits turned part is made of aluminum that meets light weight but with enough tensile strength requirements .

 

Cu Zn Mg Fe Mn Cr Si Al
0.3 0.25 1 0.7 0.15 0.1 0.5 balance

                                                             Chemical element for unit joint kits

 

Dimensions for gastroscope unit joint kits turned part

 

Bushing
Bushing length 25
Bushing hole 15
Bushing diameter 19.5
Thread for bushing M10
Header
Length 35
Diameter 18
Hole diameter 10
Joint pipe
Length 60
Diameter 19.5
Hole diameter 10
Thread M10

Unit : mm

 

Standard for unspecified tolerances

 

Tolerances for gastroscope unit joint kits turned part normally are +/-0.05 mm and unspecified tolerances are based on ISO 2768-m with f level .

 

Level 0.5-0.3 3-6 6-30 30-120 120-400 400-1000 1000-2000 2000-40000
f ±0.05 ±0.05 ±0.1 ±0.15 ±0.2 ±0.3 ±0.5 -

                                                                        Linear tolerances

 

Level 0.5-0.3 3-6 Above 6
f ±0.2 ±0.5 ±1

                                                               Radius and chamfer tolerances

 

Level 0-10 10-50 50-120 120-400 above 400
f ±1° ±0°30' ±0°20' ±0°10' ±5°

                                                                         Angle tolerances

 

 

Finish for gastroscope unit joint kits turned part

 

Black oxidation with bright surface .

 

 

Mechanical property for gastroscope unit joint kits turned part

 

Tensile strength σb (MPa) 310
Yield Strength σs (MPa) 276
Elongation δ 0.2 (%) 12
Reduction of area ψ (%) 25

 

 

Physical performance for gastroscope unit joint kits turned part

 

Specific heat capacity(0~100℃,KJ·kg-1K-1) 896
Heat conductivity(W·m-1·K-1) 43
RResistivity(20℃,10-6Ω·m) 0.059
Density g/cm3) 2.73

 

 

Characteristics for gastroscope unit joint kits turned part

 

1 , Strict dimensions with small tolerances

 

2 , Black oxidation with RoHS comply

 

3 , No burrs and scratch

 

4 , Harden material

 

5 , Corrosion resistant

 

 

We have more than ten years experience on customized turned parts with CNC and Auto lathe parts , products are used to different fields in industry , if you have any interesting on our product , please contact us soon .

सम्पर्क करने का विवरण
VEDALI HARDWARE CO., LTD

व्यक्ति से संपर्क करें: MR.LIN

दूरभाष: +8613556778272

हम करने के लिए सीधे अपनी जांच भेजें (0 / 3000)

अन्य उत्पादों